Diskussion:Berlin:Firmware:Howto
Aus wiki.freifunk.net
Zur Navigation springenZur Suche springenChoosing an Image
- I think in the beginning you should sort out which image to choose because the description is based on a certain image. like:
I believe this information should be presented in another document such as "Choosing a Firmware Image" -Perry
- for this we should reference to Berlin:Firmware#Image-Typen, to only have one place to document the types
- I agree that this is an excellet place to keep the information. But it is also terribly out of date and contains very little detail. @sam0815, could you image updating this section?
- default: Der freifunk-Knoten bei dem der Traffic direkt ausgeleitet wird.
- tunnel-berlin: Der freifunk-Knoten bei dem der traffic über den community-tunnel ausgeleitet wird.
- vpn03 _deprecated_: Der freifunk-Knoten bei dem der traffic über vpn03 des Fördervereins ausgeleitet wird. Damit funktionieren noch die alten keys/Schlüssel bis Mitte Mai 2018.
- for this we should reference to Berlin:Firmware#Image-Typen, to only have one place to document the types
- I just made a draft for this: Benutzer:Akira/Image-TypenDraft If you want to, you can just copy it to the corresponding part of the FAQ, once Hedy is released. -Martin
- I added more information. I left some things in englsh. Please someone translate -Perry
- Here is an English version. Maybe both english and german version can be on the same wiki page, one on top of another. Benutzer:Pmelange/Image-TypenDraft
- I understand that it should be more descriptive and the current version is a good basis for that. But I think we should transfer some of the side-information (history and law stuff and so on...) into own articles or other parts of the Howto. Now, plenty information not dealing with the images is given. -Martin
Welche andere Seiten sollen gemacht (und wer machts?)
- Main Howto Page, with descriptions of all the following pages
- English Benutzer:Pmelange/HowtoDraft
- German - Can someone please make a german version?
- Choose the firmware version to install
- German Origional location - out of date Berlin:Firmware#Image-Typen
- German Benutzer:Akira/Image-TypenDraft
- English Benutzer:Pmelange/Image-TypenDraft
- Flashen von Original Firmware
- German Benutzer:Pmelange/FlashDraft
- English - Benutzer:Pmelange/FlashEnDraft
- Upgrading to Hedy (will be integrated in Hedy-1.0.1)
- Perry
- @Holger, is there a ticket for this? @perry What kind of ticket? It's a milestone https://github.com/freifunk-berlin/firmware/milestone/8
- English Benutzer:Pmelange/UpgradeToHedyDraft
- German Benutzer:Akira/UpgradeToHedyDraft <- elder version
- German (another version) Benutzer:Torte/UpgradeToHedyDraft
- Backup and Restore
- Perry
- English Benutzer:Pmelange/BackupDraft
- German Benutzer:Torte/BackupDraft
- Viewing OLSR Status
- viewing Statistics
- OLSR Services
- Adding the private network to the wireless ap. Adding the private network
- Mesh on Lan
- Done, but should it be updated? Cleaned up?
- German Origional location: Berlin:Tutorial:Mesh_via_LAN
- Switch VLAN Config
- Done, but should it be updated? Cleaned up?
- German Origional location: Berlin:Switch_VLAN_Konfiguration
Bebilderung der Anleitung
Hallo Leute,
ich wollte gerade auf diese Tutorial-Seite verlinken und habe festgestellt, dass es im Gegensatz zur alten Anleitung von berlin.freifunk.net keine Bilder gibt. Ich denke aber, dass sie ganz praktisch gerade für Einsteiger sind. Was haltet ihr von der Idee, diese Bilder hier wieder einzufügen?
Viele Grüße Akira
P.S.: Waren diese Bilder nicht sogar in einer früheren Version des Drafts enthalten?
- Klar gibt's die Bilder, eben auf den eigentlichen Seiten des Howtos, u.a. Berlin:Firmware:Howto:Flash -- Maqi (Diskussion) 13:16, 22. Mai 2018 (CEST)